Submersible Mixer

Overview

Submersible mixers are suitable for a wide range of applications in industrial effluent treatment plants and municipal sewage treatment plants. They provide the right solution to match mixing tasks for agitating, blending, mixing, dissolving and suspension of solids in industry and municipal treatment plants.

In WWTP’s it is essential to keep moving the effluent to prevent them to settle down and make thick layer in the bottom of tank. Our mixers are able to meet the needs arising out of the most common agitation processes occurring in waste water treatment, such as equalization, homogenization, keeping solids in suspension, de-nitrification, flocculation, flash mixing.

In Sewage treatment plant where is Equalization tank height is more than 4 meter and volume from 50 m3 , installation, service and lifting of submersible mixer becomes very typical. For safety of humankind it becomes very essential to install or use the device which is easy to operate, install and lifting the submersible mixer from the tank.


Particular Specification ( Model RW 200- RW 600 )
Application Mixing and stirring application in Sewage Treatment Plant and industrial area, Homogenization of highly concentrated sludge and slurries
Make Sulzer
Mixing Flow ( Minimum to Maximum ) From 50 m3/h to 3000 m3/h
Maximum Propeller Dia 650 mm
Material of Construction Cast iron/Stainless steel 304/Stainless steel 316Ti
Weight ( Minimum to Maximum ) 25 Kg 300 kg
Motor Kw. 1.3 Kw to 13 Kw
Motor Specification Multiple and gear driven mixer with standard and explosion proof motor enclosure
Motor Efficiency Standard / IE 3
Motor IP IP 68
Motor Enclosure Class Class F
Insulation Class B Class
Motor Type Squirrel cage induction motor
Maximum Immersion 6 meter
Tank Type Round & Square
Bearing Long Lasting Bearing lifetime of more than 1,00,000 hours

Our Valued Clients